> ## Content Index
> Fetch the complete content index at: https://blog.esadax.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Step-by-Step Guide to Installing an SSL Certificate on Your Server Using Esadax
- URL: https://blog.esadax.com/en/step-by-step-guide-to-installing-an-ssl-certificate-on-your-server-using-esadax/
- Published: 2026-11-15T04:16:22.000Z
- Updated: 2026-11-15T04:16:22.000Z
- Author: Esadax 
- Tags: #tr-faq-06-ssl-ssl-installation-service, #en, #mdx-imported, FAQ

## 1\. Activate SSL through Esadax

- **Contact Support**: Reach out via email (`sslsupport@esadax.com`) or live chat (available at `https://www.esadax.com/help-center/live-chat/`).
- Provide your server details and domain name for SSL activation.

## 2\. Pass Domain Control Validation

- **Create CNAME Record**: Log into your domain provider's dashboard and add a CNAME record pointing to `esadax.com` or `ns1.esadax.com`.
- Ensure the DNS settings are correct; some providers may require specific configurations.

## 3\. Obtain SSL Certificate Files

- After validation, Esadax will provide:
  - **CSR (Certificate Signing Request)**: Used to generate your certificate.
  - **Private Key**: Essential for SSL installation.
  - **Intermediate Certificate**: If required by your server.

## 4\. Install SSL on Your Server

Choose the control panel or server software you're using:

### a. cPanel/WHM

- **Upload Certificates**: Use File Manager in cPanel to upload the CSR, private key, and intermediate certificate.
- **Configure SSL**: Go to WHM → Service Management → SSL/TLS → Add Domain.

### b. Plesk

- **Upload Certificates**: Navigate to Plesk Admin Panel → SSL/TLS → Upload Certificate.
- **Enable SSL**: Set the certificate as active in the same section.

### c. DirectAdmin

- **Upload Files**: Use the file manager to upload your SSL files.
- **Enable SSL**: Go to Services → Domain Settings and enable SSL for your domain.

### d. VestaCP

- **Upload Certificates**: In VestaCP, go to SSL/TLS → Add Domain and upload your files.
- **Configure HTTPS**: Ensure HTTPS is enabled in the same section.

### e. Webmin

- **Upload Files**: Use the file manager within Webmin to upload your SSL files.
- **Set HTTPS Redirect**: Configure HTTPS settings to redirect HTTP traffic to HTTPS.

### f. Apache HTTPD/Nginx/IIS

- **Upload Certificates**: Depending on your server, use FTP or SFTP to transfer files to the appropriate directory (e.g., `/etc/ssl/apache` for Apache).
- **Configure SSL**: Edit the configuration file (e.g., `apache.conf` for Apache) and set up SSL directives. Restart Apache after changes.

## 5\. Set Up HTTPS Redirect

- Ensure that all traffic on port 80 (HTTP) is redirected to port 443 (HTTPS). This can be done via your control panel or server configuration files.

## 6\. Verify Installation

- Test your SSL setup by accessing your website using `https://yourdomain.com`.
- Check the SSL/TLS status in your control panel to ensure everything is active.

## 7\. Remote Assistance

- If you encounter issues, Esadax offers remote installation assistance via chat or email.